Wireless Communication; Remote Unit Registration - T&D RTR-57C User Manual

【Communication between RTR-51/52/53
RVR-52 and your Computer】
1.
Connect the communication cable.
① Connect the RTR-57C Unit to your computer with the provided
communication cable (RS-232C).
② Place the data logger on the RTR-57C.
Place the unit face down
on the RTR-57C.
NOTE:
If light enters during communication, an error will occur. Please make
sure to place the unit within the ridges for an exact fit.
2.
In order to carry out wireless communication, register Groups and
Remote Units.
※ For details about how to register, see the [Help Menu] in the provided
software『T&D Recorder for Windows 』or the accompanying User's
Manual.
17
Communication Cable
(to computer)

Wireless Communication:

Remote Unit Registration

NOTE:
Wireless communication can only be carried out with RTR-51/52/53 and
●
RVR-52 units that have been registered as Remote Units via the provided
software『T&D Recorder for Windows』.
Please extend the antenna when using wireless communication.
●
◆ Register the data logger unit to be used as a Remote Unit.
1.
Connect the cable so that communication can occur between the
data logger and your computer. (See p.15-17)
Place the unit face down
on the RTR-57C.
2.
Open『T&D Recorder for Windows 』.
3.
In the Main Window, click [Remote Unit Registration] and carry
out the registration.
If you wish to make Recording Start settings via computer, see the [Help
Menu] in the display for the type of logger you wish to make settings for.
Details can also be found in the『T&D Recorder for Windows』User's Manual
explanation of the [Recording Start] display.
Communication Cable
(to computer)
[Remote Unit Registration]
Icon
18