Graph Display - T&D RTR-57C User Manual

Graph Display

In this display you can view in graph for m the downloaded
temperature, humidity, voltage, and pulse data.
A graph is displayed for each channel of data and can be scrolled
left and right with the operation dial or by the buttons on the main
unit.
①
CH1
②
③
※⑥・⑦ are displayed when [Set ↑↓ Limits] has been set as ON.
① Displayed Channel
If there is recorded data in two channels, by holding in the operation dial
for more than 1.5 seconds the channel will change.
② Scale
If you want to set the temperature display unit for Fahrenheit (゜ Ｆ),
open [SET FUNCTIONS]-[Temp Unit C/F].
③ Vertical Axis Unit
[C] : Celsius, [F] : Fahrenheit, [%] : Humidity, [V] : Voltage, [P] : Pulse
37
④
⑤
⑥
⑦
OK
⑧
④ Data Information
Displays the measurement information of the cursor bar position.
Recording Date
and Time
Recording Interval Recording Mode
S:Seconds M: Minutes One Time:
【For Pulse Data】
⑤ Cursor Bar (Fixed Display)
Cursor position is displayed and measurement information is displayed at
the top of the LCD display.
⑥ Upper and Lower Judge Range
When [ ↑↓ Judge] is ON, the range is displayed.
⑦ Upper and Lower Limit Judging Result
When [ ↑↓ Judge] is ON, the result is displayed.
⑧ Cursor
Shows which part of entire data is presently displayed in graph.
The display can be scrolled with the operation dial or the buttons on the
main unit.
Temperature Unit
Endless:
Response Polarity
Rising Edge (OFF → ON) :
Falling Edge (ON → OFF) :
38