Searching For Remote Unit - T&D RTR-57C User Manual

Searching for Remote Units
A mark will appear next to all Remote Unit Names with which
communication is possible. This function can be useful when
selecting Remote Units for downloading data or starting recording.
1.
In the Main Menu, open [ SEARCH RMOTE].
2.
Select the search range from ([All Groups] or [Specify Group])
and click to start the search.
By selecting [All Groups], the search will be for Remote Units in all
●
groups registered in the RTR-57C unit.
By selecting [Specify Group], the search will be for Remote Units in the
●
specified group.
3.
After the search has been completed, a list will appear showing
only the Remote Units with which communication is possible.
A mark will appear next to the Remote Unit names with which
●
communication is possible.
The mark will continue to appear next to Remote Units with which
●
communication has become impossible until a new search is conducted.
A search of 1 group will take about 20 seconds to complete. (The search
●
time depends on the number of Remote Units registered in the group.)
By selecting a Remote Unit with which communication is possible and
●
clicking on it, you can either download data or get info about that unit.
45
【Searching for Remote Units that have been additionally registered
in another RTR-57C Unit】
During step 2 at left, by holding in the operation dial, you can search for
Remote Units that have been additionally registered to the same group name
in another RTR-57C unit. Found Remote units will automatically appear with a
Remote name as shown below.
S r 0 7 3
Remote Unit number at the time
of registration
46