T&D RTR-57C User Manual page 21

5.
When communication has been completed the message [COMM
END] will be displayed and by pressing the operation dial, the
display will return to the menu. The Remote Unit will star t
recording.
◆ About the Default Settings
At anytime, you can return the RTR-57C to its default settings.
Recording Mode: Endless
Recording Interval: 10 minutes
Channel Names: 1 channel...ch.1, 2 channel...ch.2
31
【Programmed Start】
1.
In the Main Menu, open [REC SETTINGS]-[Direct].
2.
Set the recording conditions.
Recording Modes:
One Time: Recording will stop when the data capacity becomes full.
Endless: Recording will continue with oldest data continuously overwritten.
Recording Interval:
Choose from 15 intervals: 1,2,5,10,15,20,30 seconds and 1,2,5,10,15,20,30 and
60 minutes.
3.
Move the arrow to [Programmed] after setting the conditions.
4.
Set the recording start time and move the arrow to [REC START].
32