Notice To Nfc Users (Mainly Europe); Notes To Users In The State Of California (Notes To Users In Usa) - Ricoh SP 330DN User Manual

9. Appendix
Energy efficiency
The amount of electricity a machine consumes depends as much on its specifications as it does on
the way you use it. The machine is designed to allow you to reduce electricity costs by switching to
Ready mode after it prints the last page. If required, it can immediately print again from this mode.
If no additional prints are required and a specified period of time passes, the device switches to an
energy saving mode.
In these modes, the machine consumes less power (watts). If the machine is to print again, it needs
a little longer to return from an energy saving mode than from Ready mode.
For maximum energy savings, we recommend that the default setting for power management is
used.
Products that comply with the Energy Star requirement are always energy efficient.
Notice To NFC Users
Declaration of Conformity
Notice to Users in EEA Countries
This product complies with the essential requirements and provisions of Directive 2014/53/EU.
The CE Declaration of Conformity is available by accessing the URL: http://www.ricoh.com/products/
ce_doc2/
and selecting the product applicable.
NFC
Operating frequency: 13.56 MHz
Maximum radio-frequency power: less than 42
* Maximum radio-frequency power is depended on power value of reader/writer device

Notes to users in the state of California (Notes to Users in USA)

Perchlorate Material - special handling may apply. See: www.dtsc.ca.gov/hazardouswaste/
perchlorate
194
(mainly Europe)
dBµA/m
(at 10m)