Optional Settings - ResMed Elisee 350 Clinical Manual

Sample log entries:
P P
11 : 47: 14
Vt Vt
11 : 55: 12
12 : 34: 14
+ - al HP

5.9 Optional settings

Screen brightness (during ventilation or while ventilation is
stopped)
WARNING
Check that the volume is appropriate for the level of background noise.
0 cm
H2O
Ventil. Ventil.
stop stop
90
80
70
60
50
40
HP
30
20
10
0
<PE
Touch screen sound
On the brightness setting screen:
0 cm
ACV ACV
H2O
Ventil. Ventil.
stop stop
90
80
70
60
50
40
HP
30
20
10
0 <PE
Screen orientation
The user can change the screen orientation based on where he/she is standing in relation to the
ventilator.
cm
0
H2O
ACV ACV
Ventil. Ventil.
stop stop
90
80
70
60
50
40
HP
30
20
10
0 <PE
NOT013281-8
MAXI MAXI The Maximum Pressure alarm was triggered at 11:47:14.
The Minimum Tidal Volume alarm was stopped at 11:55:12.
MINI MINI
The High Pressure alarm threshold was changed (new value: 60 cm H
»
60 60
ACV ACV 1. After configuring ventilation, press the
Back Back
3 seconds until the screen shown on the left appears.
info
2. Press the brightness scale to change the setting. If set to
"AUTO", the setting will self-adjust according to the ambient
light and the screen lighting will turn off automatically after
two minutes, provided that no alarm has been triggered and
the
pressed.
Note: The screen brightness is reduced to its lowest level as
soon as the Internal Battery Low alarm is triggered.
1. The picture on each button shows the action associated
Back Back
with it, but provides no information on current settings.
info
•
Press the
•
Press the
1. Press the
Back Back
info
screen.
button, button and the touch screen have not been
button to activate the beep sound.
button to deactivate the beep sound.
button to invert the orientation of the
O).
2
button for
How to use Elisée 350 61/102