Setting Up - ResMed Elisee 350 Clinical Manual

4 Setting up

4.1 Power supplies
Mains power pack (housed in the compartment under the
ventilator)
CAUTION
•
Before installing the mains power pack, disconnect the power cord.
•
Use only the power pack and the specific cord supplied with the ventilator.
Connecting the device to mains power enables you to recharge the internal battery.
1
2
3
4
NOT013281-8
1. Insert the two nibs on the mains power pack into their slots.
2. Press firmly on the mains power pack until the clip locks into
place.
3. Connect the mains power cord to the power port on the side of
the pack.
4. Fold the fastening clip into place to prevent the plug from
accidentally coming out of its socket, then plug the cord into the
wall socket and turn on the switch (if necessary).
Setting up 35/102