10. Engine Error Code
10-1 Error Code (Digital Display)
This unit is equipped with monitoring function. When it detects the engine error, the monitor lamp
would illuminate.
Refer to the "12. Engine Error Code Chart" for the details in this manual on pages 49-52.
Error Code
Display
Engine Monitor
Display
Display Selector Switch
1) Error code in the "engine monitor display" shows "engine rpm", "water temp." and "oil
pressure" when the selector switch is pressed each time.
2) "Output Monitor" displays number of the malfunction if malfunctioned. Press the "selector
switch" so the "engine monitor" displays the error code.
10-2 Error Code (Flash Pattern)
The monitor lamp that locates in the front panel indicates engine malfunction with a pattern by
flash.
To check
1) Turn the starter switch to "RUN".
2) The Monitor lamp will flash when engine malfunctions. (ref: page 46)
Note: The lamp turns on for approx. 3 sec. when engine malfunctions.
3) When engine malfunctions;
a) Press and hold the "Engine Operation Button" located in the back of the front panel.
(ref: page 44)
b) The "engine mode display" shows current and past malfunction 3 times.
(Ref: "Engine Error Code Chart" for the details on pages 49-52.)
22
Engine Monitor Lamp
Output Monitor Display
Display "quantity" of
malfunction
Display Selector Switch