Note
a) Past record of malfunction is stored in the ECM (Engine Control Module) even after the
past malfunction had cured.
b) Each engine code displayed in the "engine output monitor" and "engine monitor panel"
is not identical.
c) Monitor lamp does not function when engine is running.
d)
The monitor lamp
Note: The monitor lamp will flash 3 times only when there was malfunction.
"Engine Operation Button" locates in the back of the front panel
(ref: page 13 & 44 & 46.)
Press and hold the "memory
clear switch" in the engine
control switch so current and
past malfunction records are
displayed.
will blink when
there was no malfunction today and in the past.
Engine Monitor Lamp
23