Shindaiwa DGK25F Service Manual page 6

Work Safely
Generators and welders operate at very high
speeds and can do serious damage or injury
if they are misused or abused. Never allow a
person without training or instruction to
operate and serve this equipment!
Attention to CAUTION LABEL！
Caution labels are placed on this equipment
and it would request special attention for
operation. Make sure to locate the labels
and understand the content of the caution.
・Check the caution labels is legible. Always
keep the labels clean or replace them when
worn or damaged
・Clean the labels by cloth, water or
detergent and never use organic solvent or
gasoline which may cause label peel off due
to adhesive solvent.
・Make sure to replace the labels when
damaged and illegible.
Before replacing the label(s), make sure to
place the new label(s) in the same position.
CAUTION
STOP the equipment immediately when
abnormal circumstances are noticed!
STSTOP the equipment immediately whenever
abnormal circumstances are noticed such
as unusual noise, smell, vibration and etc.
It may lead serious accident or fatal damage
of the equipment or properties.
Inflammables！
Keep the equipment far away from fire such
as cigarettes when refueling fuel, oil or
battery fluid.
NEVER operate or service the equipment
nearby fire as the equipment may catch
fire.
No Modification！
NEVER modify the equipment without
manufacturer's advanced approval. .
It may lead serious safety issue and damage
the equipment.
Inspect the equipment before engine
start for operation and periodical inspection
without fail！
Make sure to serve initial check before start
engine and periodical inspection for safety
and longer life of the equipment.
3