Bay Networks BayStack ARN Routers none Installation And Operating Manual page 112

Installing and Operating BayStack ARN Routers
OSPF Worksheet
Requested Information
Enter decimal value in seconds for Poll
Interval [20]:
(For NBMA only)
Enter IP address of neighbor in dotted
decimal notation or enter q to quit:
(For NBMA only)
Enter IP address of neighbor in dotted
decimal notation:
(For PPP only)
Static Route to Site Manager Worksheet
Requested Information
Destination Network [0.0.0.0]:
Destination Network Mask [0.0.0.0]:
Next-Hop Address:
B-10
(continued)
Options
Enter the largest number of
seconds allowed between Hello
packets that the router sends to an
inactive NBMA neighbor.
The router suggests a 20-second
interval.
Enter addresses for all NBMA
neighbors you want the router to
communicate with.
When you finish entering
addresses, enter q and press the
Return key.
Enter addresses for the PPP
neighbor you want the router to
communicate with.
Options
Enter the gateway address of the
destination network. An address
of 0.0.0.0 specifies the default
route.
Enter the subnetwork mask of
the destination network. A mask
of 0.0.0.0 specifies the default
route.
Enter a next-hop address. All
static routes require a next-hop
address in the same subnet as
the initial IP interface.
Your Response
Your Response
(continued)
114200 Rev. A