Table of Contents
Advertisement
Global Information Worksheet
Step
Requested Information
Enter connector number [1]:
Enter clock source number [2]:
Enter clock speed number [10]:
Enter circuit name [S#]:
114200 Rev. A
Using Local Boot (the Quick-Start Procedure)
(continued)
Options
If there is only one connector on
the module you chose, the script
automatically assigns a
connector number and bypasses
this prompt. Otherwise, the script
lists the available connectors. For
example, for an ARN with five
serial connectors, the options are
1. COM1
2. COM2
3. COM3
4. COM4
5. COM5
1. Internal
2. External
This prompt appears only if you
chose an Internal clock source.
The script lists a range of values,
with 64 K as the default.
The script displays a default
circuit name for the COM
interface you selected (for
example, S11 for COM1 and S12
for COM2).
Your Response
Press the Return
key.
(continued)
B-5
Advertisement
Table of Contents
