Hard Disk Drive Hot Swap Feature - Nokia 500s Installation Manual

copy of the operating system) and mirror hard disk drive. The mirror hard disk
drive contains a copy of all of the files on the source hard disk drive, and if the
source hard disk drive fails, the mirror hard disk drive immediately takes over.
The 500s appliance continues to operate normally.
You can use Nokia Network Voyager to create and delete mirror sets.
Note
If your 500s appliance contains two hard disk drives when you receive it,
the disk-mirroring feature is already enabled.
For more information about disk mirroring, including configuration details,
see the Nokia Network Voyager Reference Guide and the IPSO Release Notes
and Getting Started Guide.

Hard Disk Drive Hot Swap Feature

A hot swap button is located on the front panel of each hard disk drive.
Pressing the hot swap button allows you to hot swap hard disk drives if you
have configured and enabled disk mirroring.
Caution
Hard disk drives are susceptible to damage from shock. Handle
them with care.
Caution
To protect the 500s appliance and the memory modules from
electrostatic discharge damage, make sure you are properly
grounded before you touch these components. Use a grounding
wrist strap and follow the instructions provided with the wrist strap
before you handle the components or open the appliance. If you do
not have a grounding wrist strap, make sure you are properly
grounded before you touch any electronic component.
Nokia 500s Installation Guide
Replacing a Hard Disk drive
101