Using Nokia Network Voyager To Manage Your 500S Appliance - Nokia 500s Installation Manual

Using Nokia Network Voyager to Manage Your
500s Appliance
Use Nokia Network Voyager to configure and monitor your 500s appliance.
For additional information about how to use Network Voyager, see
"Accessing Nokia Network Voyager Reference Information"
Network Voyager Inline Help"
To open Nokia Network Voyager
1. Start a Web browser on the host you plan to use to configure or monitor
2. In the Location or Address field, enter the IP address of the initial
For more information, see the section in the appropriate installation guide
about entering passwords.
Note
If the username login screen does not appear, you might not have a
physical network connection between the host and your appliance, or you
Nokia 500s Installation Guide

Using Nokia Network Voyager to Manage Your 500s Appliance

To connect Ethernet devices, use a straight-through RJ-45 cable to
connect to a 10-Mbps or 100-Mbps hub.
For details, see "Ethernet NIC Connectors and Cables"
To connect Gigabit Ethernet devices, use a fiber-optic cable with an LC
connector for each NIC interface. The destination end of the cable can be
either LC or SC, depending on the type of connector required for the
destination Gigabit Ethernet device.
For details, see "Fiber-Optic Gigabit Ethernet NIC Connectors and
Cables" on page 74.
your appliance.
interface you configured for the appliance.
You are prompted to enter the admin username and the password you
entered when you performed the initial configuration.
on page 53.
on page 71.
and "Nokia
51