Nokia 500s Installation Manual page 106

8
Installing and Replacing Other Components
To remove a hard disk drive without using the hot swap feature
1. If both of the following are true:
you do not need to use the following substeps to shut down the operating
system. Instead, press the hot swap button on the hard disk drive and
proceed to
a. Access Network Voyager.
b. On the Network Voyager home page, click Config.
c. Scroll to the bottom and click Reboot, Shut Down System.
d. Click Halt.
e. Wait until the activity LED for the hard disk drive is extinguished.
f. Use power switch on the back panel to turn the appliance off.
2. Loosen the retaining screws on both sides of the hard disk drive.
Caution
To avoid damage to the ejection lever, loosen the retaining screw
behind each ejection lever before you remove the hard disk drive.
106
You are removing a hard disk drive used as part of a disk-mirroring
implementation, and
The hard disk drive is not active
step 3.
For information about how to access Network Voyager and the related
reference materials, see
51.
"To open Nokia Network Voyager"
Nokia 500s Installation Guide
on page