Nokia 500s Installation Manual page 62

4
Installing and Replacing Network Interface Cards
b. Insert a blank bezel onto the front of the empty slot formerly occupied
Note
The blank bezel is required for the 500s appliance to meet emissions
requirements during operation.
12. From the top of the PMC carrier, screw the NIC retaining screws into the
standoffs on the back of the NIC.
62
by the NIC and push it gently into place.
Make sure that the bezel is completely seated onto the slot on the front
of the PMC carrier and that the screw holes on the bottom of the bezel
align with those on the bottom of the PMC carrier. Proceed to step
Nokia 500s Installation Guide
13.
00312