CDD-880 Multi Receiver Router
Appendix C
Figure E-8. Hub Configuration – Standalone CTOG-250, No Redundancy
While the Figure E-8 diagram suggests inclusion of the management network portion, it is not
strictly required. However, what is strictly required is that the following holds true for all
Advanced VSAT deployments:
•
The Management IP Addresses for all units have IP connectivity to the NetVue and VMS
server's IP Address.
•
CDD-880 management ports must have a packet path to the Management IP Address of the
CDM-840s.
•
CDM-840s have a packet path to the Management IP Address of the CTOG-250.
If you have multiple Advanced VSAT outbound carriers at a single Hub, Comtech EF Data
recommends the deployment architecture shown in Figure E-9.
C–10
MN-CDD880
Revision 2