CDD-880 Multi Receiver Router
Appendix C
C.8
Compatible Features and Detailed Specifications
Advanced VSAT BPM Mode is compatible with the following features:
Feature
Group QoS (CTOG-250)
and QoS (CDM-840)
Header Compression
Payload Compression
PTP (Precision Timing Protocol)
RANOP with E1
dSCPC with VMS
Entry Channel Mode (ECM)
AES-128
Return Link ACM
ACM/VCM on the Outbound
Comtech Dynamic Routing Protocol (for the management network)
Multicast
IPv6 (traffic ports only)
VLAN trunking
VLAN Access Mode on the CDM-840
CTOG-250 and CDD-880 device redundancy with the VMS
The following features are not supported when in BPM Mode:
•
The standalone CDM-800* does not support BPM due to packet per second limitations.
•
Single Hop-on-Demand (SHOD) Mesh.
•
CDD-880 Port Diversity.
*Starting with Firmware Ver. 1.5.1.X, the CDM-800 no longer supports standalone
mode. The CDM-800 must be paired with a CTOG-250.
Comments
Includes the following L2 Protocols:
• Ethernet 2.0
• Ethernet 2.0+VLAN-tag+VLAN-tag
• 802.3-raw
• 802.3-raw+VLAN-tag+VLAN-tag
• 802.3+802.2+VLAN-tag
• 802.3+802.2+SNAP
• 802.3 +802.2+SNAP+VLAN-tag+VLAN-tag
Includes the following L3/L4 Protocols:
• IP, UDP, TCP, RTP
C–13
MN-CDD880
• Ethernet 2.0+VLAN-tag
• Ethernet 2.0+MPLS
• 802.3-raw+VLAN-tag
• 802.3+802.2
• 802.3+802.2+VLAN-tag+VLAN-tag
• 802.3+802.2+SNAP+VLAN-tag
• 802.3+802.2+SNAP+MPLS
Revision 2