CDD-880 Multi Receiver Router
Ethernet-based Remote Product Management
6.3.3.3.4
Configuration | Network | Working Mode
See Appendix B. BPM (BRIDGE POINT-TO-MULTIPOINT) OPERATION for more details
on operating a network in BPM Mode.
Figure 6-18. Configuration | Network | Working Mode Page
Working Mode
Select the desired working mode:
•
In Router Mode, the traffic ports of the CTOG-250, CDD-880, and CDM-840 are configured
to function as a Router.
•
In BPM Mode, all L2/L3/L4 protocols such as VLAN, MPLS, IPv6, OSPF, and BGP will flow
through the network as they would through an off-the-shelf Ethernet Switch. The Advanced
VSAT BPM feature makes the Advanced VSAT equipment appear as a "Sky Ethernet Switch".
This will allow for a greatly simplified network deployment.
Click [Submit] to save.
6–30
MN-CDD880
Revision 2