Rear Panel Optional Features; On-Site Firmware Updates; On-Site Operational Upgrades; Monitor And Control Interfaces - Comtech EF Data CDD-880 Installation And Operation Manual

CDD-880 Multi Receiver Router
Introduction
1.3.3.2.2

Rear Panel Optional Features

As per Figure 1-5, from left to right:
Optional Power Interface:
•
48 VDC Primary Input Power Supply with Screw-in Fuse Holders
Optional hardware operation:
•
(1X) DB-9M EIA-232 REDUNDANCY connector.
Rear Panel Rack Support Brackets Kits are available from Comtech EF Data:
•
KT-0000168 4" Rear-Mounting Support Brackets Kit
• KT-0000195 10" Rear-Mounting Support Brackets Kit
Sect. 2.2.1 Install the Optional Rear-Mounting Support Brackets Kit
1.3.4

On-site Firmware Updates

Chapter 4. UPDATING FIRMWARE
Field update of the operating system firmware is possible through file upload via satellite or the
Ethernet port.
1.3.5

On-site Operational Upgrades

Chapter 5. FAST ACTIVATION PROCEDURE
Field activation of software-based options is possible through Comtech EF Data's FAST (Fully
Accessible System Topology) Feature upgrade process.
1.3.6

Monitor and Control Interfaces

•
•
The unit is managed through multiple interfaces providing options for both in-band (over
satellite) and out-of-band monitor and control.
Chapter 6. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT
Chapter 7. SERIAL-BASED REMOTE PRODUCT MANAGEMENT
1–7
MN-CDD880
Revision 2