Standard Vs. Extended Position - FireplaceXtrordinair ProBuilder 36 CleanFace MV Installation Manual

12

Standard vs. Extended Position

There are two positions that the standoff/heat shield assembly can be installed. The standoffs are
shipped in the standard (forward) position.

If the unit is installed in the standard position no modification is needed.

If the unit is being installed in the extended position, the standoff/heat shield assembly must
be repositioned back ½" (see illustration below).
NOTE: see pages 11 & 31.for additional details about standard vs. extended installations.
© Travis Industries
Installation
(for qualified installers only)
9/25/18 - 1488
Extended Position
Standard Position
PB36 CF Install