9-Wire Remote Installations - Emerson Micro Motion 2700 Installation Manual

Installing the Transmitter continued
Figure 2-4 Transmitter components – 4-wire remote or remote core processor with
remote transmitter installations
Mounting bracket
4 X Cap screws
(4 mm)
Junction end-cap
2.3.3

9-wire remote installations

If you chose a 9-wire remote installation (see Figure 2-1), see Figure 2-5 for a diagram of the
mounting bracket supplied with the transmitter/core processor assembly. Ensure that the transmitter is
mounted and oriented in a way that will allow easy access to the terminals and to the display (if your
transmitter has a display).
Figure 2-5 9-wire remote – Wall mount or pipe mount
Mounting bracket
(wall mount)
12
Ground screw
Mating connector
Mounting bracket
Main enclosure
Mating connector
socket
(pipe mount)
Transmitter Installation: Model 1700 and 2700 Transmitters
Conduit opening
for 4-wire cable
Junction housing