Installation Manual
MMI-20075112
Figure 3-7: Pole-mounting bracket attachment for a stainless steel transmitter
3.3 Wire a remote-mount transmitter to the sensor
Use this procedure to wire a 4-wire or 9-wire remote-mount transmitter to the sensor.
Prerequisites
•
Prepare the 4-wire cable as described in the sensor documentation.
•
Prepare the 9-wire cable as described in the Micro Motion 9-Wire Flow Meter Cable Preparation and
Installation Guide.
•
Connect the cable to the sensor-mounted core processor or junction box as described in the sensor
documentation. You can access all product documentation on the documentation DVD shipped with the
product or at www.emerson.com.
Installation Manual
Mounting and sensor wiring
August 2020
15