Mounting and sensor wiring
April 2022
Figure 3-7: Pole-mounting bracket attachment for a stainless steel transmitter
3.3
Wire a remote-mount transmitter to the
sensor
Use this procedure to wire a four-wire or nine-wire remote-mount transmitter to the
sensor.
Prerequisites
•
Prepare the four-wire cable as described in the sensor documentation.
•
Prepare the nine-wire cable as described in the
Preparation and Installation
•
Connect the cable to the sensor-mounted core processor or junction box as described
in the sensor documentation. You can access all product documentation on the
documentation DVD shipped with the product or at Emerson.com.
16
Micro Motion 9-Wire Flow Meter Cable
Guide.
Micro Motion 5700 Transmitters with Configurable Inputs and Outputs
Installation Manual
MMI-20027478