Installation Manual
MMI-20029969
Figure 3-7: Pole-mounting bracket attachment for a stainless steel transmitter
3.3
Wire a remote-mount transmitter to the
sensor
Use this procedure to wire a four-wire or nine-wire remote-mount transmitter to the
sensor.
Prerequisites
•
Prepare the nine-wire cable as described in the
Preparation and Installation
•
Connect the cable to the sensor-mounted core processor or junction box as described
in the sensor documentation. You can access all product documentation on the
documentation DVD shipped with the product or at Emerson.com.
Installation Manual
Micro Motion 9-Wire Flow Meter Cable
Guide.
Mounting and sensor wiring
October 2022
15