Input; Target Mode; Reset Filter - Siemens Sitrans PROBE LU Instruction Manual

1.4.4. Transducer Temperature
The temperature inside the tank (process temperature) registered by the
transducer.
Value (view only)
Open menu View – Display, and select the tab Measured Value (Secondary
Values).

2. Input

Static Revision Number
The revision level of the static data associated with the Transducer Block,
updated whenever a standard profile configuration parameter is changed.
Class
Indicates the Level Transducer Block as per PROFIBUS PA Profile specifications.

2.1. Target Mode

If Target Mode has been changed locally and you want to prevent an
Note:
external process from resetting it back to normal, you should ensure
Lockout
Visible only via the handheld programmer. Used to request an operating mode
from the Transducer Block. (Out-of-service mode is a safety feature, used for
service purposes to stop the transducer firing).
Hand
programmer
values

2.2. Reset Filter

Resets the rate filter.
Hand
programmer
value
7ML19985JB02 SITRANS Probe LU (PROFIBUS PA) – INSTRUCTION MANUAL
Degrees in Temperature Units
(see page 74) is set to Locked.
128
16
8 *
the sensor value immediately goes to the target
1
distance
Out of Service (O/S)
Manual Mode (MAN)
Automatic Mode (AUTO)
Remote
Page 77