Programming Sitrans Probe Lu (Profibus Pa); The Handheld Programmer - Siemens Sitrans PROBE LU Instruction Manual

Programming SITRANS Probe LU (PROFIBUS PA)

The parameters that control the operation of the Probe LU are organized into function
groups, and arranged in a 4-level menu structure that can be accessed either via the
handheld programmer, or via PDM and PROFIBUS PA. (For charts showing the complete
menu structure, please see

The handheld programmer

To activate PROGRAM mode, point the handheld programmer at the display from a
maximum distance of 600 mm (2 ft), and press the Mode key
hand-held programmer
max. 600 mm
(2 ft)
Within Program Mode, the handheld programmer has two sub-modes of operation:
Navigation and Edit.
• Press Mode key
Mode: the rightmost digit of the menu number flashes, and the PROGRAM icon
is not visible.
• Press Right arrow a second time to change the mode from Navigation to Edit
mode.
• In Edit mode, the PROGRAM icon
For Quick Access to parameters via the handheld programmer, press Mode key
Note:
to activate PROGRAM mode, then enter the menu number (see
menu structure
on page 49).
1.
For more instructions on local programming using the handheld programmer, please
Appendix D: programming via the handheld programmer
see
7ML19985JB02 SITRANS Probe LU (PROFIBUS PA) – INSTRUCTION MANUAL
Appendix E: LCD menu structure
1
display
function
keys
to switch from RUN to PROGRAM and enter Navigation
appears and flashes.
on page 49.)
.
1 2 3 4
5 6 7 8
9 0
C
Appendix E: LCD
on page 42.
numeric keys
Page 17