Siemens Sitrans PROBE LU Instruction Manual page 15

Environmental
• location
• altitude
• ambient temperature
• relative humidity
• installation category
• pollution degree
• pressure rating
Notes:
• Please check the ambient and operating temperatures above;
Approvals (verify against device nameplate)
are about to use or install.
• The use of approved watertight conduit hubs/glands is required for Type 4X/NEMA 4X,
Type 6/NEMA 6, IP67, IP68 (outdoor application).
Process
• temperature
(at flange or threads)
• pressure (vessel)
Approvals (verify against device nameplate)
• General
• Hazardous Intrinsically Safe: (Europe)
1.
Intrinsically Safe wiring drawing (FM/CSA)
See
2.
Non-incendive (FM Class I, Div. 2) wiring drawing
See
7ML19985JB02 SITRANS Probe LU (PROFIBUS PA) – INSTRUCTION MANUAL
indoor/outdoor
5000 m (16,404 ft) max.
−40 to +80 °C (−40 to +176 °F)
suitable for outdoor
(Type 4X/NEMA 4X, Type 6 /NEMA 6, IP67, IP68
enclosure)
I
4
0.5 bar g/7.25 psi g
−40 to +85 °C (−40 to +185 °F)
0.5 bar g/7.25 psi g
CSA , FM, CE, C-TICK
US/C
(US/Canada) FM/CSA
Non-incendive: (US)
Process
below, for the specific configuration you
ATEX II 1 G EEx ia IIC T4
1
: barrier required
Class I, Div. 1, Groups A, B, C, D
Class II, Div. 1, Groups E, F, G
Class III
2
FM :
Class I, Div. 2, Groups A,B, C, D
on page 107 for drawing number 23650617.
on page 111 for drawing number 23650583.
below; and
T4
T5
Page 9