Sewing Operation; Switching On; Selection Of A Buttonhole Program - DURKOPP ADLER 559 Instruction Manual

10.5 Sewing operation

10.5.1 Switching on

10.5.2 Selection of a buttonhole program

28
–
Switch on main switch.
The machine moves to the loading position. The main level is
indicated in the display.
–
Field 1: used buttonhole program
–
Field 2: The first two digits indicate the thread tension.
The last two digits indicate the cutting length of the
buttonhole or the internal diameter of the eyelet in mm.
–
Press the "F"-key.
Go to field 1 with the keys ïð. The buttonhole program is blinking
–
(e.g. P02).
–
Select the desired buttonhole program (P01 to P05) with the
keys ñò.
–
Confirm by pressing the "OK"-key.
You can also select the buttonhole program via menu item 100
alternatively.
Field 1
Field 2