Operating The Menu; Selection Of A Menu Item; Editing Of A Value - DURKOPP ADLER 559 Instruction Manual

10.4 Operating the menu

10.4.1 Selection of a menu item

Menu item without submenu
Menu item with submenus
Submenu item

10.4.2 Editing of a value

The menu system of the 559-151000 is subdivided in 3 levels. The
main level indicates the used buttonhole program, the needle thread
tension and the cutting length while sewing. You can change over from
the main level to the menu for programming buttonholes. A menu item
can include further submenu items.
"P"-key Press the "P"-key for changing over from the main level
to the menu system. A menu item is indicated.
If the menu item has no submenus you see a value,
which you can alter, in the right field of the display.
If the menu item has submenus, you see three items in
the right field of the display. The values of this menu
item are adjusted in the submenus.
Keys ñò Select the desired menu item with the keys ñò.
"OK"-key Press the "OK"-key to confirm the value of the selected
menu item.
If the selected menu item includes submenus a menu
item of the selected submenu is indicated when
pressing the "OK"-key. Select the desired submenu item
also with the keys ñò and confirm with the "OK"-key.
Now you can alter the value.
Key ï With the key ï you return to the next menu level above,
from the submenu level to the menu level, from the
menu level to the main level.
"ESC"-key With the "ESC"-key you always return directly to the
main level.
Keys ïð With the keys ïð you select the digit of the value you
want to alter.
The values can only be altered in certain steps. The
sewing speed for example can only be altered in steps
of 1000 or 100, i.e. the digits 10 and 1 cannot be selected.
Keys ñò With the key ñ the value of the selected digit is
increased.
With the key ò the value of the selected digit is
reduced.
All values have got minimum and maximum values
which cannot be exceeded or fallen below.
"OK"-key With the "OK"-key you take over the altered values.
You return to the menu selection.
"ESC"-key With the "ESC"-key you abort the value alteration.
The previous value is reproduced again. You return to
the menu selection.
1
23