Lubrication - DURKOPP ADLER 559 Instruction Manual

10.

Lubrication

4 3
12
5 1
1
Caution: Danger of injury !
Oil can cause skin eruption.
Avoid a longer contact with the skin!
Wash yourself thoroughly after a contact!
ATTENTION !
The handling and disposal of mineral oils is subject to legal
regulations.
Deliver used oil to an authorized collecting station.
Protect the environment.
Be careful not to spill any oil!
Fill up the oil reservoirs exclusively with lubricating oil DA-10 or an
equivalent oil with the following specification:
–
Viscosity at 40°C:
–
Ignition point:
The oil can be bought at the sales points of DÜRKOPP ADLER AG
under the following parts numbers:
250 ml Container:
1 l Container:
2 l Container:
5 l Container:
ATTENTION !
If the automatic buttonholer has not been used for a long time or after
assembling the machine, oil the wicks, felts, looper and needle bar
components.
–
Loosen screws and remove the face and front plate
–
Oil the felts and the wicks 1.
–
Apply one or two drops of oil to the needle bar and needle bar
bushing.
–
Screw on the face and front plate.
–
Remove the clamping plates.
–
Oil the wick 3.
–
Apply one or two drops of oil to the spreader 4 and the spreader plate 5.
1
10 mm²
150°C
9047 000011
9047 000012
9047 000013
9047 000014
1 1 1
2 2
/s
2