Kohler Industrial Generator Set Operation Manual page 48

Menu Summary List Continued
Voltage Regulator
Menu (DEC3000 before
Version 3.0.25)
D Enter Voltage Regulator?
(Yes or No) *
d Voltage Regulator
Adjust
d Exit Voltage Regulator
Voltage Regulator Menu
(DEC3000 Version 3.0.25
or higher, and APM402)
D Voltage Regulator Voltage
Adjust *
D Reset Voltage Regulator
Settings *
d Reset Voltage
Regulator?
* User-Defined (changeable) Menu Displays. Use SiteTecht software to change other settings including User-Defined Menu Displays.
NOTE: Some changes require activating the calibration or adjustment mode. Some displays may only appear when in the calibration or adjustment
mode. Refer to Section 2.7 Reviewing Menu Displays to activate the calibration or adjustment mode.
48 Section 2 Operation
(Legend: D First level submenu, d second level submenu)
Digital Inputs
Menu
D DIn A1
D DIn A2
D DIn A3 (Reserved for
Enclosure Temperature:
High Shutdown on select
Telecom units only)
D DIn B1 (with I/O Board)
D DIn B2 (with I/O Board)
Digital Outputs
Menu
D DOut A1
D DOut B1 (with I/O Board)
D DOut B2 (with I/O Board)
D DOut B3 (with I/O Board)
D DOut B4 (with I/O Board)
D DOut B5 (with I/O Board)
Analog Inputs
Menu
D AIn A1 (factory reserved
and not user
programmable)
D AIn A2
D AIn B1 (with I/O Board)
D AIn B2 (with I/O Board)
Battery Charger 1
Menu
D Output Volts
D Output Amps
D Charger State
D Software Version
D Reduced Out
D Temperature
Compensation
Battery Charger 2
Menu
D Output Volts
D Output Amps
D Charger State
D Software Version
D Reduced Out
D Temperature
Compensation
Event Log
Menu
D See 1.2.4 for a list of
items that can appear in
Event Log
Volt Select Menu
(DEC3000 Version 2.8.22
or higher, and APM402)
D Volt Select: *
d 120/240 V 1 Ph
d 120/208 V 3 Ph
d 139/240 V 3 Ph
d 277/480 V 3 Ph
d 120/240 V 3 Ph
TP-6694 7/18