Kohler Industrial Generator Set Operation Manual page 47

Menu Summary List
Overview Menu
(DEC3000
before version 4.11)
Available as scrolling or
fixed display text
D Active Shutdowns (if
present)
D Active Warnings (if
present)
D Genset State
D Average Volts
Line-to-Line
D Frequency
D Current
D Average kW
D Coolant Temperature
D Oil Pressure
D Fuel Level % (with
diesel-powered models
and optional fuel tank
sender)
D Fuel Pressure (engine
dependent)
D Battery DC Voltage
D Engine Run Time
D Software Version
* User-Defined (changeable) Menu Displays. Use SiteTecht software to change other settings including User-Defined Menu Displays.
NOTE: Some changes require activating the calibration or adjustment mode. Some displays may only appear when in the calibration or adjustment
mode. Refer to Section 2.7 Reviewing Menu Displays to activate the calibration or adjustment mode.
TP-6694 7/18
(Legend: D First level submenu, d second level submenu)
Overview Menu
(DEC3000
version 4.11 and APM402)
Available as scrolling or
fixed display text
D Active Shutdowns (if
present)
D Active Warnings (if
present)
D Genset State
D Average Volts
Line-to-Line
D Frequency
D Current
D Average kW
D Coolant Temperature
D Oil Pressure
D Fuel Level % (with
diesel-powered models
and optional fuel tank
sender)
D Fuel Pressure (engine
dependent)
D Battery DC Voltage
D Engine Run Time
D Battery Charger Volts
and Amps, CHG1 and
CHG2 (with charger
GM87448 only)
D Software Version
Engine Metering
Menu
D Engine Speed
(Tachometer)
D Oil Pressure
D Coolant Temperature
D Fuel Level (with
diesel-powered models
and optional fuel tank
sender)
D Battery DC Voltage
D Fuel Pressure (engine
dependent)
Generator Metering
Menu
D Total Power kVA (shown
as actual output values)
D Total Power kW (shown
as actual output values)
D Rated Power
D Volts, L1--L2 *
D Volts, L2--L3 *
D Volts, L3--L1 *
D Volts, L1--N *
D Volts, L2--N *
D Volts, L3--N *
D Current, L1 *
D Current, L2 *
D Current, L3 *
D Frequency
D Reset Calibration (User
can reset individual volt
and current values or
reset all values)
GenSet Information
Menu
D Generator Set Model No.
D Generator Set Serial No.
D Controller Serial No.
GenSet Run Time
Menu
D Engine Run Time
D Engine Loaded
D Engine Starts
D Total Energy kWh
GenSet System
Menu
D System Frequency
D System Phase (Single
Phase, Single Phase
Dogleg, Three Phase
Wye, or Three Phase
Delta)
D System Volts
D Power Rating
D Amp Rating
D Power Type (Standby or
Prime)
D Battery DC Voltage
D Measurement System
(Metric or English) *
D Contrast (display) *
D Alarm Silence (Always or
Auto Only)
D Manual Speed Adjust
(available option)
GenSet Calibration
Menu (DEC3000 before
version 3.0.25)
D Enter Calibration
(Yes or No) *
d Volts, L1--L2
d Volts, L2--L3
d Volts, L3--L1
d Volts, L1--N
d Volts, L2--N
d Volts, L3--N
d Current, L1
d Current, L2
d Current, L3
d Reset Calibration
d Reset All Calibration
(Yes or No)
d Exit Calibration
Section 2 Operation 47