Table of Contents
Advertisement
B-Chapter 7(US)
4/16/98 8:43 AM
7
C
ARE AND
The machine prints out
the nozzle test pattern.
5
Examine the test pattern.
This example shows a
test pattern of all nozzles
functioning correctly on
the black print cartridge.
This example shows a
test pattern of all nozzles
functioning correctly on
the color print cartridge.
6
Compare the diagonal line at the top and bottom of the test pattern.
Look for a break in the diagonal line. A broken line shows any
clogged nozzles.
If the bottom line shows improvement, rerun this test. If
improvement continues, rerun the test again. If all nozzles are not
printing after running the test three times, continue with the next
step.
7
If print quality does not improve, remove and reinstall the print
cartridge. See ÔReplacing the Print CartridgeÕ on page 7.10 for
complete instructions on removing and reinstalling a print
cartridge.
8
Repeat the nozzle test.
9
If the line is still broken, wipe the nozzles and contacts. For help,
see ÔWiping the Print Nozzles and ContactsÕ on page 7.10.
7.6
C
S
C
HAPTER
EVEN :
Page 7.6
M
AINTENANCE
P L E A S E W A I T
C L E A N I N G . . .
M
ARE AND
AINTENANCE
: yellow
: red
: blue
(appears in
SF4100/4200 only)
Advertisement
Table of Contents
