Samsung SF4000 Operator's Manual page 100

B-Chapter 7(US) 4/16/98 8:43 AM
7
C
ARE AND
4. Clean the ADF rubber piece also.
5. Carefully wipe the scanning glass with
a soft, dry cloth.
If the glass is very dirty, first wipe
it with a slightly dampened cloth,
then with a dry cloth. Be very
careful not to scratch the glass
surface.
6. Replace the roller in reverse order, and
then close the control panel firmly until
it clicks into place.
7.2
C S C
HAPTER EVEN :
Page 7.2
M
AINTENANCE
M
ARE AND AINTENANCE
ADF rubber
Scanning glass