Samsung SHR-6040 User Manual page 40

Keyboard Dialog
User ID USER
Password
****
Shift
OK
 Site IP
Sets the IP address for the main system to be
connected to the network. If the connection mode
is set to STATIC-IP, the user needs to enter the IP
address directly.
 Subnet mask
Sets the subnet mask address for the main system.
 gateway
Sets the gateway address for the main system.
 Port(TCP)
The port number is selectable from 554 to 2048.
 Bandwidth
Set the maximum speed of transferring video data over
a network.
36_ menu setup
Back
Cancel
Web Viewer Port Settings
Web Viewer Port Setting
Port 80
move/Control
Set the number of a port where Web Viewer will be
used on the Web browser. The port number is set to
80 by default.
 Port
Set the number of a port where Web Viewer will be
used on the Web browser. You can set the port
number to 80 to 60080.
OK Cancel
Select Exit