Samsung SHR-6040 User Manual page 25

Time/Date/Language Setup
Date/Time/Language Setup
Time Setup 2007-04-03
Date Type YYYY - mm - dd
Time Type 24
Language English
move/Control
 Time Setup
The following screen appears if the enter(
is pressed.
(GmT) Greenwich mean Time : D
Year month Day
2007 4 3
DST month Week Weekly Hour
1 1st SUN 0
Off
move/Control
Select the standard time zone suitable to the
corresponding region.
To change the date and time, move the cursor to the
corresponding item and press the enter(
Then, change the day/month/year or second/minute/
hour using the  or  buttons. Escape from the
change mode by pressing the enter(
When the time is changed, the date and time will be
halted until "OK" or "Cancel" is pressed.
 If the date and time are changed to
earlier values, the data written prior
Caution
to the change may be deleted. For
example when the 8 o'clock in the
morning is changed to the 7 o'clock in
the morning, the data written between 7
and 8 in the morning will be deleted.
05:12:46
OK Cancel
Select Exit
) button
Hour min Sec
6 5 10
month Week Weekday Hour
~
1 2st SUN 0
OK Cancel
Select Exit
) button.
) button again.
 DST (Daylight Saving Time)
DST sets the clock one hour ahead the local standard
time. This setting enables the system to display the
time adjusted for DST. If the date set for DST comes,
the system time runs one hour faster.
If the DST is set to "OFF", it will not be applied. It is
impossible to enter the date menu on the right. When
you set the DST to "ON", designate the start time on
the left and the end time on the right while basing on
the "~" mark.
 Date Type
It supports a total of 9 formats (such as Year-Month-
Day / Day-Month-Year / Month-Day-Year).
 Time Type
It supports two formats of 24 hours / 12 hours (AM/
PM).
 Language
After selecting a language, OSD is displayed in the
selected language. The available languages are
displayed in the list.
Password
User manager -
Password
Old Password ****
New Password ****
Confirm Password ****
Record Lock
move/Control Select
 Old Password
When this product is shipped, the password of
'ADmIN' user account will be set to '4321'.
 New Password
A virtual keyboard will appear if the enter(
is pressed. You can input characters one by one up to
16 characters.
 Confirm Password
This is the menu for confirming a newly changed
password.
 Record Lock
If the Record Lock is set to On, a pop-up window,
asking for the password appears while disabling the
recording.
OK Cancel
Exit
) button
menu setup _21