Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1
Connect the coaxial cable as indicated on page 13.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2
Plug the DVD-VCR into the mains.
Result:
The
Language Set
3
Select the required language by pressing the
4
Press OK to store the language selected.
Result:
A message appears.
5
Press OK button.
6
Press OK to start the auto scanning.
◆
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
➢
Auto preset can be performed by pressing ■ (STOP) on
the VCR continuously for 5 seconds or more with no
tape inserted.
menu is displayed.
or
buttons.
TV
2
Auto setup
Please wait
00 %
Clock Set
Time
Date
Year
12 : 00
1/JAN
2003 WED
GB
15