Connecting Other Equipment To Your Dvd-Vcr; Plug & Auto Set Up - Samsung CHT-350 Instruction Manual

Connecting Other Equipment to Your DVD-VCR

GB
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
The RCA input/output connectors on the rear of the DVD-VCR are used for equipment,
such as camcorders, VCRs or sound systems.
REAR OF THE DVD-VCR
12
Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1 Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2 Plug the DVD-VCR into the mains.
Result:
Camcorder
3
Select the required language by pressing the
4
Press ENTER to store the language selected.
Result:
VCR
5
Press ENTER to start the auto scanning.
The number of stations automatically stored by the DVD-VCR
depends on the number of stations that it has found.
6
Check the data and time. (see page 17)
Sound system
7 On completion, press RETURN twice to exit the menu.
8 This will only happen if you have tuned TV to VCR or AV cables
are connected and TV is switched to TV.
Auto preset can be performed by pressing (STOP) on the
DVD-VCR continuously for 5 seconds or more with no
tape inserted.
The LANGUAGE SET menu is displayed.
œ or ❷ buttons.
A message appears.
GB
TV
2
AUTO SET UP
PLEASE WAIT
60%
I -------I
RETURN
CLOCK SET
12:01 1/JAN/2003
WED
➛¤❿¤¤¤
RETURN œ ❷
13