Table of Contents
Advertisement
VCR
GB
STANDBY/ON
6
LENGTH 2:30
SET LENGTH :
34
Recording a Programme with Automatic Stop
EJECT
PROG
DVD
VCR
LINE2
3
4
4
OK
5
●
PRESS
REC
This function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.
1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:
The DVD-VCR is switched on automatically.
4
Select:
◆
The station to be recorded using the PROG ( or ) buttons
or
◆
The LINE1, LINE2 source using the INPUT SEL. button for a
satellite tuner or external video source
Result:
The channel number is displayed and the programme
can be seen on the television.
5
Select the recording speed by pressing the SPEED button as
many times as required (see page 32).
Hold the REC button ( ● ) down for a while to start recording.
6
Result:
The record indicator appears on the television screen
and DVD-VCR display. An index is recorded on the
tape (see page 42).
Press the REC button ( ● ) several times to increase the
7
recording time in:
◆
30-minute intervals up to four hours
◆
1-hour intervals up to nine hours
Result:
The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the DVD-VCR stops
recording automatically and power off.
8
If you wish to cancel the recording before the end, press
STANDBY/ON.
☛
If the end of the tape is reached while recording:
◆
The recording stops and power off.
☛
This function is not available in DVD recording
Advertisement
Table of Contents
