VCR
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press M
GB
If you wish to...
Select an input source other
than the tuner (LINE IN 1 or LINE IN 2)
Record a programme every day
(Monday to Sunday) at the same time
Record a programme every week
on the same day and at the same time
Extend the recording time
Select the recording speed
36
Modifying G-CODE Programming
a second time to confirm.
ENU
Then...
◆
Press the
or
buttons, until the
◆
Press the INPUT SEL. button one or more times to change the
input source selection.
Result:
The programme number is replaced by:
•
The LINE IN 1 or LINE IN 2 source using the
INPUT SEL. button for a satellite tuner or
external video source
➢
The input source must be selected before changing any
other value.
◆
Press the
or
buttons, until the
◆
Press the
or
buttons, until the
displayed.
◆
Press the
or
buttons, until the
◆
Press the
or
buttons, until the
displayed, followed by the required day.
Example:
W-SA
(Weekly Saturday)
◆
Press the
or
buttons, until the
◆
Press the
or
buttons to increase or decrease the stop
time.
◆
Press the
or
buttons, until the recording speed selection
flashes.
◆
Press the
or
buttons until the correct indication is
displayed:
• AUTO
(Auto Tape Speed Select) : see page 37
• SP
(Standard Play)
• LP
(Long Play)
PR
selection flashes.
DAY
selection flashes.
DLY
(Daily) value is
selection flashes.
DAY
(Week) value is
W-
STOP
selection flashes.