Table of Contents
Advertisement
Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1
Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2
Plug the DVD-VCR into the mains.
Result:
The
Language Set
3
Select the required language by pressing the
4
Press OK to store the language selected.
Result:
A message appears.
5
Press OK button.
6
Press the
or
buttons to select your country.
❷
The VCR searches for the stations according to a preset
preference list corresponding to the country that you have
selected.
7
Press OK to start the auto scanning.
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
8
The current time and date are displayed automatically.
Check the date and time.
if it is :
Correct, Press RETURN button twice to exit the menu.
incorrect, see page 17.
Auto preset can be performed by pressing
the VCR continuously for 5 seconds or more with no
tape inserted.
menu is displayed.
or
buttons.
❷
(STOP) on
TV
2
Auto setup
Please wait
00 %
Clock Set
Time
Date
Year
12 : 00
1 / JAN / 2003 WED
Auto Clock : On
LINE OUT
L
GB
R
13
Advertisement
Table of Contents
