Table of Contents
Advertisement
Using the Timer Programming Feature
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
☛
Before presetting a recording, check that the date and
time are correct.
1
Insert the cassette and press TIMER on the remote control.
Result:
The
TIMER PROGRAMMING
2
Press
to select the input source.
3
Select the required station by pressing the
INPUT SEL. to select the LINE1, LINE2 input sources.
4
Press
to select the recording day.
5
Select the required day by pressing the
6
Press
to select the recording start time.
7
Select the required hour value by pressing the
8
Press
to select the minutes.
9
Select the required minute value by pressing the
10
Press
to select the recording stop time.
11
Select the required recording stop time by pressing the
buttons, following the same procedure as when selecting the
recording start time.
12
Press
to select the recording speed.
13
Press the
or
(Long Play),
Auto
14
When you have finished, press the RETURN button.
15
Press the STANDBY/ON button to activate the timer.
Result:
Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
➢
Auto Tape Speed Select. The DVD-VCR's "Auto Tape
Speed Select" function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
menu is displayed.
,
or
buttons to select the
SP
(Standard Play),
(Auto Tape Speed Select) recording speeds.
buttons or
buttons.
or
buttons.
or
buttons.
or
LP
VCR
Timer Method
Standard
G-Code
STANDBY/ON
OPEN/CLOSE
15
37
GB
Advertisement
Table of Contents
