Presetting The Stations Manually - Samsung V80 Instruction Manual

VCR
GB
Australia Model
Auto Setup
Manual Setup
VCR Output CH
Newzealand Model
Auto Setup
Manual Setup
TV System
VCR Output CH
TV STATION TABLE
PR CH
1
2
3
4
5
DELETE : CLEAR
MANUAL TUNING
PR
CH
MFT
NAME
22

Presetting the Stations Manually

Install
: CH 38
Install
: G
: CH 36
NAME
SWAPPING : OK
RETURN
:
: - -
: -
: - - - -
MEMORY : OK
RETURN
☛
You do not need to preset the stations manually if you
have already set them automatically.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK or to select this option.
Result: The Install
4
Press the corresponding
Setup option is selected.
5
Press the OK or to select a
Result: The
TV STATION TABLE
6
Press the or buttons to select a programme number as
required.
7
Press the button to preset the station.
Result: The MANUAL TUNING
8
Press the or buttons to start scanning channel.
Result: The frequency band is scanned and the first station
found is displayed.
9
Press the or buttons until the
The station name is set automatically from the broadcast signal.
10
To change the programme's name, press the button.
Result: The first letter of the name flashes.
11
To...
Select a character
in the name
Move to the next or
previous character
12
If you...
Wish to store the
station displayed
Do not wish to
store the station
displayed
13
Repeat this procedure from Step
stations have been stored.
14
On completion, press the RETURN button three times to exit the
menu.
.
, buttons to select the
menu is displayed.
or buttons, until the
Manual Setup option.
menu is displayed.
menu is displayed.
NAME is selected.
Then...
Press the or button until the
required character is displayed
(letters, numbers or "-" character).
Press the or buttons
respectively.
Then...
◆ Press the or buttons until the
is selected.
◆ Press the or buttons to adjust the
picture, if necessary.
◆ Press OK to store the station
◆ Press the or buttons until the
is selected.
◆
Press the or buttons to go on
scanning the frequency band and display
the next station
◆ Go back to the beginning of Step
6
onwards, until all the required
Install
Manual
MFT
CH
14