Table of Contents
Advertisement
Connecting Other Equipment to Your DVD-VCR
GB
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
The RCA input/output connectors on the rear of the DVD-VCR are used for equipment,
such as camcorders, VCRs or sound systems.
REAR OF THE DVD-VCR
12
Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1
Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2
Plug the DVD-VCR into the mains.
Result:
3
Select the required language by pressing the
4
Press ENTER to store the language selected.
Camcorder
Result:
5
The COUNTRY SELECTION MENU is displayed. Press the
buttons to Select your country and press ENTER.
❷
Start the auto scanning.
The number of stations automatically stored by the DVD-VCR
VCR
depends on the number of stations that it has found.
6
Check the data and time. (see page 17)
7
On completion, press RETURN to exit the menu.
Sound system
Auto preset can be performed by pressing
the VCR continuously for 5 seconds or more with no
tape inserted.
The
LANGUAGE SET
menu is displayed.
or
buttons.
❷
A message appears.
or
(STOP) on
GB
TV
AUTO SET UP
PLEASE WAIT
60%
I
-------I
RETURN
CLOCK SET
12:00
1/JAN/2004
THU
➛ ❿
RETURN
❷
13
Advertisement
Table of Contents
