Changing The Preset Station Table - Samsung V80 Instruction Manual

VCR
GB
Australia Model
Auto Setup
Manual Setup
VCR Output CH
Newzealand Model
Auto Setup
Manual Setup
TV System
VCR Output CH
TV STATION TABLE
PR CH
1 21
2
3
4
5
DELETE : CLEAR
TV STATION TABLE
PR CH
1
2
3 21
4
5
DELETE : CLEAR
24

Changing the Preset Station Table

Install
: CH 38
Install
: G
: CH 36
NAME
- - - -
SWAPPING : OK
RETURN
NAME
- - - -
SWAPPING : OK
RETURN
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK or buttons to select this option.
Result: The Install
4
Press the corresponding
option is selected.
Setup
5
Press the OK or button to select this option.
Result: The TV STATION TABLE
6
Press the corresponding
TV programme is selected.
Result: The selected station is displayed at the same time on
the television screen.
7
To change the programme number assigned to a station press the
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
8
Press the or buttons to select required position.
And then press OK again to swap the position.
9
On completion, press the RETURN button four times to exit the
menu.
.
, buttons to select the
menu is displayed.
or buttons, until the
menu is displayed.
or buttons, until the required preset
Install
Manual