Table of Contents
Advertisement
Connecting DVD-VCR to a Satellite Receiver or Other Equipment
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
GB
The RCA input/output connectors on the rear of the DVD-VCR are used for equipment,
such as camcorders, VCRs or sound systems.
REAR OF THE DVD-VCR
12
Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1
Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2
Plug the DVD-VCR into the mains.
Result:
3
Select "Language"
Camcorder
Use the
"Language," then press the OK or ❿ .
Press ➛ or ❿ to select the hour, minutes, day, month and year.
4
Result:
VCR
5
Press the
Result:
Sound system
6
On completion, press RETURN to exit the menu.
The Auto Setup is started automatically.
or
buttons to highlight
œ
❷
The option selected highlight.
œ
or
❷
buttons to increase or decrease the value.
The day of the week is displayed automatically.
You can hold the
œ
or
❷
buttons down to scroll more
quickly through the values.
Auto preset can be performed by pressing
(STOP) on
the VCR continuously for 5 seconds or more with no
tape inserted.
TV
GB
Language Set
English
w A
v
ß
¸
Auto Set up will be
Started.
Check antenna and
TV cable connection
Auto setup
Please wait
00 %
Clock Set
Time
Date
Year
12 : 00
1/JAN
/
2003/WED
13
Advertisement
Table of Contents
