Table of Contents
Advertisement
Removing a film in mid-roll
Press the
button.
When the entire roll is rewound, " " is showing on
the LCD.
Make sure that the motor has stopped and that " " is
showing on the counter. If the camera back is opened
before the sign " " appears, it may cause a camera
fault, or the film may be exposed to light.
Be careful with film loaded in the camera
Do not open the camera back when partly
used film is loaded.
When the camera back is opened accidently
when partly used film is loaded, close the
back immediately without disturbing the film
inside.
When the back is closed, the camera rewinds
the film automatically and the sign " " appears
on the counter.
The rewound film cannot be reused for
photography.
The rewound film cannot be reused for photography. Do not
press the
button unless you need to have partially
exposed film developed.
Do not press the
button with a sharp pointed material.
29
Hide quick links:
Advertisement
Table of Contents
