FujiFilm KLASSE W Owner's Manual page 21

Insert a film.
While holding the film cassette, pull the end of
FILM TIP
the film out to the
it on top of the spool.
Close the camera back.
The film advances to the first frame automatically.
If the film cassette is not set properly, the camera back
cannot be closed completely.
If film is pulled out too far, take the film out and adjust the
length of film. Note that the front part of the film may be
exposed when it is pulled out too far.
The type, rolls, and film speed of the film can be checked
through the film confirmation window.
mark, and place
If the film is not loaded properly, " " blinks on the film
counter and the shutter cannot be released. Load a
film again making sure it is loaded properly.
Check the number on the film counter.
21