Operation; Controls - Exmark LAZER Z Series Operator's Manual

Figure 5
Model with 96 Inch Deck
1. Rollover Protection
System (ROPS)
2. Engine Controls (right
console)
3. Seat belt
4. Motion control levers
5. Fuel cap (both sides)
6. Parking brake
g237956
7. Center deck height of cut
8. Wing deck height of cut
9. Left wing deck
10. Step
11. Right wing deck

Operation

Note: Determine the left and right sides of the
machine from the normal operating position.

Controls

Motion Control Levers
The motion control levers located on each side of
the console control the forward and reverse motion
of the machine.
Moving the levers forward or backward turns
the wheel on the same side forward or reverse
respectively. Wheel speed is proportional to the
amount the lever is moved.
Moving the levers outward from the center position
into the T-slot locks them in the neutral position
(Figure 6).
Note: When the motion control levers are in the
neutral position, a LCD indicator displays on the
message display.
25
Operation